Health and medical centre system

Health and medical centre system

1. What is the health and medical centre floor system?
Elastic self-leveling high-capability floor system of 2-3mm, firm and durable, low pollution, and there are types of static-free and anti-bacteria for option.

2. Main characters
Compact surface, easy to clean, satisfy your sanitation requirement
Will not generate bacteria
Anti-bacteria floor is used in environment with high sanitation requirement, which is another defensive measure except for two cleaning procedures.
Anti-slide
Wearable, can endure concentrative load, concussion resistance
Totally felt with the base, avoid life-form to generate on the floor surface
Beautiful design
Anti-chemical cankers, such as blood, salt, ethanol disinfector and cleanser, etc.
No slots on the surface, assure a clean and tidy surface, so as to reduce the maintaining cost
Static-free system is used in floors that apply anesthetic gas and which have electronic facilities

Apply in the following areas:
- Areas with busy traffic
- Areas require high elasticity, e.g. aisles, sickrooms, waiting rooms, etc.
- Areas require reducing noise, absorbing energy and high elasticity, e.g. sickrooms, baby rooms, etc.
- Areas require high elasticity and beautiful appearance, e.g. aisles, waiting rooms, retiring rooms, main alleyways, etc.
- Static-free areas, e.g. operation rooms, etc.

Exterior layer
Provide beautiful and anti-scraping surface which can enhance the capability of the floor.

Main body layer
Assure self-leveling polyurethane resin of engineering capability

Bottom layer
Assure the whole layers felt with the base.

3. Cleaning and disinfect
We can provide detailed information of maintaining, cleaning and disinfecting of types of health and medical centre floor system. In low, medium and high health care facilities, there are different systems for option. Dishcloth and machines can be applied in all types of floors, and it can also use many kinds of disinfectant bactericide. Estimate the anti-pollution of the system via shelling the scope which applied disinfectant bactericide, and get results in according to let the disinfector respectively stick for 8 hours and 24 hours before cleaning.
It has to clean the overflowed disinfector of dark color, and then clean drastically, acrylic acid brightening materials need to be used to reduce blots on the surface.
In case of damage on the new floor, it can be replaced via re-construct the surface and paint. The floor looks brand-new based on lower cost.